3.0mm AWG9 Round Wire Forming Machine For Starter Armature Manufacturing WIND-AWF-R
(1) Application:
Low duty cars starter
(2) Advantages:
| Hairpin cycle time |
The cycle time for small magnet wire is 2.5s to 3s per piece
|
|
Feeding length |
Controlled by servo motor, adjustable
|
|
Hairpin forming process |
Straighten, feeding wire, remove enamel(mean time press wire), cutting, forming
(three cylinder for cutting, forming and twisting U)
|
(3) Parameter:
Voltage: 380V
Presure: Min 0.5Mpa
Wire diameter 1.8mm to 3.4mm
Wire feeding length: 0~250mm
Efficiency: 2.3s/pc
Power: 500W
Weight: around 700KGS
Dimension: 1700mm*600mm*1650mm
(4) Configuration:
1. Mitsubishi PLC, WEINVEIW 10-inch touch screen.
2.Taiwan HIWIN linear guide and module, Delta servo motor line. Line length adjustment.
3. Taiwan Nicholas precision planetary reducer.
4. Taiwan AIRTAC pneumatic parts and solenoid valves.
Hairpin forming for starter armature is one of the armature manufacturing process and below information are required to check when you send inquiry
| 1. Formed conductor drawing | To check the size of conductor and angle of R size |
| 2. Armature lamination drawing | To check the adpation of the formed wire which will be inserted to armature slot by machine or by hand |
| 3. Armature sample with formed wire inserted | To check and produce tooling according the actual sample |
Below drawings are required and example for send quotation
Armature assembly drawing
Armature part drawings
Please click below picture to view video
