Commutator Face Turning And Riser Surface Lathing Machine For Starter Armature WIND-CT-TH4
(1) Application
The turning machine WIND-CT-TH4 can turn commutator face also Riser raisor surface of starting motor
armture, This finish turning machine is precison device for turning the excircle of commutators.
Adoption of a servo control mode to horizontal/longitudinal feeding, the machine is high effiencicy and
stability, online automated prodution can be achieve in a fully automatic armature production line.
(2) Competitive Advantages
1. Can lathe commutator surface, also starting armature commutator riser surface
2. X axis control the length of turning left right horizontal position
Z Axis control the depth of lathing in vertical position
3. Economic Type, easy opeartion for developing countries' user including India
(3) Specification
| Roundness: | ≦0.003mm |
| Surface roughness: | ≦Ra0.40 |
| Rotor outer diameter: | Ф20-Ф80mm |
| Rotor shaft length: | 32-250mm(Lengthenable customizable) |
| Rotor shaft diameter: | Ф2-Ф18mm(customizable) |
| Commutator outer diameter: | Ф4.3-Ф60mm |
| Armature OD | Ф20-Ф90mm |
| Turning capability: | rough turning Max0.20mm diameter |
| Speed amplitude modulation: | 0-60Hz |
| Feeding unit: | 1μm-0.5mm arbitrary |
| Cutting length: | Max50mm |
| Feeding speed: | Stepless adjustable |
| Control mode: | stepping, automatic |
| Operation method: | Touch screen operation |
| Air source pressure: | 5-7kg/cm² |
| Turning times: | 1-4 Any setting |
| Fixture: | Diamond V-shaped Frame |
| Total power: | 2Kw |
| Power source: | AC220V 50/60Hz |
(4) Below information is needed when you send inquiry
Armature drawing or rotor drawing
Please click below photo to view the video
