Brushless Motor Inslot Stator Coil Needle Winding and Tapping Machine WIND-2-TSM
Application:
Inslot Stator such as fan motor, washing machine motor, compressor motor, stepper motor which requires
winding and tapping
Advantages:
1. Delta PLC, Delta Servo System
2. Easy Operation with Human-Machine interference
3. Rich experience in 6,8,9,12 tooth can ensure the good performance of winding machine
and handled types of 6 tooth poles stator which need tapping
Parameter:
Wire diameter: 0.08 to 1.2mm
Stator ID: above 19mm
Stack height: 7 to 90mm
Air pressure:5~7kg/square centi-meter
Power:AC380V 50/60Hz
Weight: about 500kgs
Dimension: 1800(L)x1150(W)x1600(H)mm
Winding Cycye Time example:
| 1.BLDC motor for elevator door 12 poles stator diameter inside 64.5 mm ,outside 105 mm and 320 spire every poles | It cost around 9 to 10 minutes per piece |
| 2. For BLDC Motor 6 poles coils winding data 435 turns per coil, wire 34 swg(0.234mm), total weight of 6 coil-90grms | It takes around 7minutes/pc That is stator output quantity 70pcs/8 hours |
Please click below picture to view video
