Starter Armature Testing Machine Belt Spins The Rotor During The Test WIND-ATS-02
Application:
Starter armature upto 36 slots
covering 13, 17, 19 (few), 21,23,25,27, 28,29,33 slots (common)
Advantages:
1. Moden concept initial positioning, comparing to tranditional starter armature tester,
the operator no need to check initial positioning manually,
Make the testing convenient and easier.
2. 100% Satisfied feedback from starter armature manufacturers.
Question and Answer:
About you testing machine, could you explain me better about that belt which spins the
armature during the test? Why need to spin, is it better than the common ones?
You asked a good question about the belt for spin, Yes, it is better than the common ones,
The armature tester WIND-ATS-02 belt spin is for automatical positioning the armature slot,
as you may see some universal armatures have obvious slots for positioning while starter armature
don't have obvious slot groove for positioning,
If without the automatical positioning, the operator need to position armature on purpose every time he
load on the armature.
Technical Data:
| Test Items | Test Description | Test result |
| Bar to Bar resistance | 0.01mΩ~10mΩ | ≤±0.5% Full scale |
| Welding resistance | 0.01mΩ-10mΩ | ±10μΩ |
| 180℃ cross resistance | 0.01mΩ-10mΩ | ≤±1.5% Full scale |
| Surge | 100-1000Vpp (Max 36sets waveform) | ±5% |
| Isolation resistance | DC 500V | 0.1-500MΩ ≤±5% Full scale |
| Hipot | AC 100-1000V | 0-20mA ≤±.5% Full scale |
1. Bar to Bar resistance,0.01mΩ~10mΩ (Out of range display OVER)
Four-terminal measurement to ensure accuracy
2. Welding resistance,0.001mΩ-10mΩ (Out of range display OVER)
Six-terminal measurement to ensure accuracy
3. Cross resistance 0.01mΩ-10mΩ
Four-terminal measurement to ensure accuracy
4. Surge 100-1000V (100V/time)
Pulse crest:0.5u sec, Frequency 1~40MHz
Standard waveform is Write, OK waveform is Green, NG waveform is Red
5. Isolation resistance DC 500V
Testing time:1~10s (0.1s/time)
Range:1~500MΩ
Accuracy: ≤±5%
6. Hipot AC 100-1000V
Testing time:1~10s (0.1s/time)
Armature commutator bars ≤ 36 bars
Testing panel cycle time: 8~9s (according to 33bars)
13, 17, 19 (few), 21,23,25,27, 28,29,33 slots (common)
Main Configuration:
15’’ Touch screen Sampling Chip: BB Relay:NAIS High voltage relay:Meder
Pneumatic parts:Airtec
Power: AC 220V,50Hz
Air pressure:0.4~0.6MPa
Temperature:0~45℃
Dimension: 950mm*1250mm*580mm
HS Code:9030390000
