Compressor Pump Motor Aluminum Die Casting Rotor Broken Bar Testing Machine WIND-RT-1
(1) Quick Details
WIND-RT-1 Rotor testing machine use high-precision sensor to detect rotor signals,
Judge defects of rotor broken bar and thin bar automatically and then alarm,
the data can be stored and printed.
(2) Advantages
1. Dedicated testing machine for judge rotor quality
2. The machine operation is simple and easy
3. Can test aluminum diecasting rotor with or without shaft
(3) Technical Data
| Rotor Diameter | 30—130mm |
| Rotor Length | 30—155mm |
| Air pressure | 0.3MPa |
| The Number of Conduction-bar | 10—100 |
| Test Speed | 100—1500rpm |
| Net Weight | Around 170KGS |
(4) Test Item
1. Broken bars, tool slim bars
2. Porosity, sand holes,residues on bars,undercasting
3. Declination error,internal short circuit in bars
4. Alignment of core with bar
5. Improper end ring (Extra cost needed)
(5) Ask and Answer
Ask:
Why the waveform next to the AC induction motor diecast rotor broken bar of will become larger by tester?
Answer:
When cut magnetic lines, the broken bar of aluminum die casting Rotor doesn’t produce induced current,
So for the next bar of cast-aluminum rotor, the current is abrupt.
When Browhole (Porosity) occur, the bar is thin or too slim,
Porosity and sand holes standard should be defined by user as they are common.
(6) Types of Rotor fixture realted factors
Rotor ID, Rotor OD, Length, End ring height
Please click below photo to view machine video
