Double Station Armature Electrical Motor Winding Machine / Small Rotor Winder WIND-ODD-2
Quick Detail:
1. This armature winding Machine machine is suitable for small armature with 3-7 slots.
2. The coil winder has two working stations so that it can wind 2 armatures at same time.
3, Machine is controlled by PLC.
Description:
This kind of Two Station Armature Winding Machine is used for the small armature with 3~5 slots.
There are 2 working stations, 2 armature can be winded at same time. Machine is controlled by PLC.
Technical parameter:
| Machine main technical parameter |
| Power source | 220VAC ±10% / 50Hz |
| Main motor power | ≤1.5kW |
| Max rotation speed of main spindle | 3000rpm |
| No. of station | 2 stations |
| Wire diameter range | 0.07mm～0.27mm |
| Armature slots range | 3 slots ,5 slots or 7slots |
| Armature O.D. range | Φ30mm～Φ43mm |
| Stack length range | 15mm～25mm |
| Armature spindle range | Φ5.5mm |
| Air source | 0.4Mpa~0.6Mpa |
| Working temperature | 45℃ |
| Store temperature | 50℃ |
| Working humidity | <65% |
| Store humidity | <45% |
Information needed for Armature Winding Machine inquiry:
1. Rotor lamination drawing
2. Rotor assemble drawing
3. Rotor stack drawing
4. Rotor winding diagram drawing: with rotor wire diameter and turn number
5. Commutator drawing
6. Required productivity
7. Other technical requirement
If possible, it will be better if customer can send us samples.
Please click below picture to view four station armature flyer winder video
https://youtu.be/ppmeJmngnFk
