Double Station Armature Testing Panel Rotor Analyser Commutator Bars Below 96 WIND-ATS-300
(1) Application
This armature testing machine test the armature with commutator bars below 96
Quick and accurate identification of rotor (armature) defects in the production process of welding, winding,
finishing, etc., and the location of the fault point, to facilitate the operator to repair the bad product.
a. For the small resistance of the welding resistance, the system adopts a direct measurement method
and truly reflects the welding condition of the commutator.
b. The voltage of the high voltage test is automatically adjusted and generated, stable and convenient.
c. Up to 3 sets of power frequency withstand voltage test meet the needs of various products.
d. All standard parameters are automatically read in one-click mode, simplifying the cumbersome
process of parameter setting.
e. Double station test fixture design greatly improves production efficiency.
f. The equipment is modularly designed according to the test function, so the work is more stable
and maintenance and maintenance are more convenient.
(2) Test Item
1. Dielectric strength (Hi-Power,Hi-pot) test, bewteen armature and coil
2. Insulation resistance,between armature and coil
3. Turn to turn insulation, between coil and coil
4. Cold resistance,between commutator segment and segment
5. Welding resistance, between commutator segment and coil welding point
(3) Operation of tester
The loading and testing mode could be shifted by sliding the safety cover.
The testing panel starts testing once the safety cover being slid upon the working station.
(4) Technical Data
| WIND-ATS-300 | Number of bars :≤96 |
| Test items | Test Description | Test results |
| | 0.001Ω-1000Ω | ≤±0.5%Full scale |
| Inter-chip resistance | Automatic environment temperature compensation |
| | 0.001mΩ-10mΩ | ±10μΩ |
| Welding resistance |
| | 0.01Ω-1000Ω | ≤±0.5%Full scale |
| 180 resistance | Automatic environment temperature compensation |
| | 100-2000Vpp | ±2.5% |
| Surge | (Max 96 sets waveform) |
| | DC 500V | 0.1-500MΩ |
| Isolation resistance | ≤±2.5% Full scale |
| | AC 100-2000V | 0-20mA |
| Hipot | (2set high pot test) | ≤±2.5% Full scale |
Power: AC220V ±10% @50Hz
Air pressure: 0.4-0.6Mpa
Temperature: 0-45℃
Armature testing machine manufacturer sample needed:
Armature sample
Please click below link to view video of motor manufacturer who use WIND-ATS series armature tester
https://youtu.be/eiuCEeQbWCo
